Custom Built Street Light Power Distribution Pedestals

Custom Built Metered Street Light Power Distribution Pedestals

For more information contact us

Cell :
905-715-2056
E-mail :
info@pedestalsolutions.com



SLM27 Metered Street Lighting Power Distribution Pedestals

  • Constructed from heavy gauge galvanized steel and electrostatic powder coated “Equipment Green” as standard. Other custom colours are available. Also available in Aluminium and Stainless Steel construction
  • All doors constructed to prevent weather intrusion without the means of a rubber gasket
  • Concealed Ventilation under lid to prevent condensation build-up
  • Stainless Steel fasteners used to mount all internal and external components
  • Choice of meter bases to meet local Hydro Authority requirements
  • Typically included with a 12 cct. 120/240V Distribution panel with a 60A or 100A, 2 Pole main breaker and any combination of 1 and 2 pole load breakers required
  • Comes complete with PVC conduits for Line and Load Side conductors and a ground wire to bond the Neutral
  • Delivered “Ready to Install” with a Service Entrance rating, 22kA I.C. series rating, and ESA approval
  • Hardware to fasten pedestal to pre-cast concrete base is included with every pedestal (base available from many pre-cast concrete manufacturers)
Typical part number: Metered SLM27
Metered SLM 42

SLM42 Metered Street Lighting Power Distribution Pedestals

  • Constructed from heavy gauge galvanized steel and electrostatic powder coated “Equipment Green” as standard. Other custom colours are available. Also available in Aluminium and Stainless Steel construction
  • All doors constructed to prevent weather intrusion without the means of a rubber gasket
  • Concealed Ventilation under lid to prevent condensation build-up
  • Stainless Steel fasteners used to mount all internal and external components
  • Choice of meter bases to meet local Hydro Authority requirements
  • Typically included with a 12 cct. 120/240V Distribution panel with a 60A or 100A, 2 Pole main breaker and any combination of 1 and 2 pole load breakers required. Larger distribution panels up to 200A and up to 100A 3 Phase can be installed
  • Comes complete with PVC conduits for Line and Load Side conductors and a ground wire to bond the Neutral
  • Delivered “Ready to Install” with a Service Entrance rating, 22kA I.C. series rating, and ESA approval
  • Hardware to fasten pedestal to pre-cast concrete base is included with every pedestal (base available from many pre-cast concrete manufacturers)
  • Can be designed to include timers, contactors, photocells etc. for any type of motor and lighting control. Please contact PSI for more information on these custom designs
Typical part number: Metered SLM42
Metered SLM 60

SLM60 Metered Street Lighting Power Distribution Pedestals

  • Constructed from heavy gauge galvanized steel and electrostatic powder coated “Equipment Green” as standard. Other custom colours are available. Also available in Aluminium and Stainless Steel construction
  • All doors constructed to prevent weather intrusion without the means of a rubber gasket
  • Concealed Ventilation under lid to prevent condensation build-up
  • Stainless Steel fasteners used to mount all internal and external components
  • Choice of meter bases to meet local Hydro Authority requirements
  • Large size allows flexibility for distribution panel selection….from a small 12 cct. 120/240V distribution panel with a 60A Main breaker up to a 60cct. panel with a 200A Main. Can even accommodate 20” wide, 600V, 3 Phase distribution panels
  • Comes complete with PVC conduits for Line and Load Side conductors and a ground wire to bond the Neutral
  • Delivered “Ready to Install” with a Service Entrance rating, 22kA I.C. series rating, and ESA approval
  • Hardware to fasten pedestal to pre-cast concrete base is included with every pedestal (base available from many pre-cast concrete manufacturers)
  • Can be designed to include timers, contactors, photocells etc. for any type of motor and lighting control. Please contact PSI for more information on these custom designs
Typical part number: Metered SLM60